TQC sheen - Bending / Impact / Cupping Testers - Impact Test
TQC sheen - Bending / Impact / Cupping Testers - Impact Test Paint Strength Testers Coating / Paint Testing Malaysia, Selangor, Kuala Lumpur (KL) Supplier, Suppliers, Supply, Supplies | Obsnap Instruments Sdn Bhd
Quantity
The TQC Impact Test is used to determine the impact resistivity and flexibility of coatings. The dual scale instrument is equipped with a special guidance which assures that the distance between each impact is always according to the standard. For correct positioning a spirit-level is built-in. Each Impact test comes as a complete set (instrument and accessoires) to perform a test according DIN/ISO 6272, ASTM D2794 and ASTM G14

Mandatory test in Qualicoat, QIB and GSB accredited laboratories.

Standards for impact testing
Below mentioned standards are a list of the possible standards. If the required standard is not listed below please contact TQC to check if adoption of this standard is possible*:


 

SP1880

SP1890

SP1891

SP1895

SP1896

Type of Impact

Indirect

Direct

Direct

Direct

Direct

ISO 6272-1:2002

 

 

 

 

ISO 6272-2:2002

 

 

 

 

ISO 6272:1993

 

 

 

 

ASTM D 2794:2004

 

 

 

 

ASTM G14-04

 

 

 

 

JIS K 5600-5-3:1989

 

 

 

EN 12206-1:2004

 

 

EN 13523-5:2001

 

 

 

AAMA 2605-05

 

 

 

Qualicoat 2006

 

 

 

Qualisteelcoat 2008

 

 

 

Canadian Standards Association (CSA)

 

 

 

 

* Conformation to a required standard depends on the impact tester type. The combination of items can change to comply with another standard.

Features:
  • The dual scale instrument is equipped with a special guidance which assures that the distance between each impact is always according to the standard. For correct positioning a spirit-level is built-in.

ORDERING INFORMATION

Art. No. SP1880
TQC Impact Test according to ISO 6272-2 and ASTM D2794
Type: Indirect Impact Tester
Content: Base plate assembly, guide tube, release collar, punch Ø12.7 mm , punch Ø15.9 mm, weight 1 kg, die Ø16.3 mm. Max test panel thickness: 4,5 mm

Art. No. SP1890
TQC Impact Test according to ISO 6272-1
Type: Direct Impact Tester
Content: Base plate assembly, guide tube, release collar, clamp device, ball Ø20 mm, die 27mm, weight 1 kg. Max. test panel thickness: 1,25mm

Art. No. SP1891
TQC Impact Test according to ISO 6272-1 and ASTM D2794 (before 1993)
Type: Direct Impact Tester
Content: Base plate assembly, guide tube, release collar, clamp device, ball Ø20 mm, die 27mm, weight 1 kg, ball Ø15.9 mm, die 16.3mm, weight 0.9 kg

Art. No. SP1895
TQC Impact Test according to ASTM G14
Type: Direct Impact Tester
Content: Base plate assembly, guide tube, release collar, punch Ø15.9 mm, weight 1.361 kg and a V-notch vise with spring clamp to hold the pipe

Art. No. SP1896
TQC Impact Test according to CSA

Please leave your enquiry here, we will reply as soon as possible.

Switch To Desktop Version