AC Clamp Meter TES-3040 Clamp Meter Electrical Inspection Malaysia, Selangor, Kuala Lumpur (KL) Supplier, Suppliers, Supply, Supplies

11 / 11

AC Clamp Meter TES-3040

Quantity

WhatsApp me if you interested

Product Features

3-3/4 Digital LCD with bar-graph.
Auto-Ranging on Volt, Ohm, Current,
Frequency measurements.
Auto-power off.
Data Hold mode.
MAX/MIN Hold mode.
Zero/Adjustment/Relative Reading.

Specification

DC Voltage（Autorange ＆ Manual）

Range	Resolution	Accuracy	Input Impedance	Overload protection
400mV	0.1 mV	±(0.75%rdg+2dgts)	≧1000MΩ	660Vrms
4V	0.001V		≒ 11MΩ
40V	0.01V		≒ 10MΩ
400V	0.1V
600V	1V

AC Voltage（Autorange ＆ Manual）

Range	Resolution	Accuracy	Input impedance	Overload protection	Frequency Response
4V	0.001V	±(1.2%rdg +5dgts)	≒ 11MΩ	660Vrms	40～450Hz
40V	0.01V		≒ 10MΩ
400V	0.1V
600V	1V	±( 1.5%rdg + 5dgts)

AC Current（Autoange ＆ Manual）

Range	Resolution	Accuracy	Overload protection	Frequency Response
400A	0.1A	±( 2%rdg + 10 dgts )	1100A	40～450 Hz
1000A	1 A	±( 2%rdg + 10 dgts )	1100A	40～450 Hz

Frequency ( Hz )（Autorange only for current）

Range	Resolution	Accuracy	Sensitivity	Overload protection
100 Hz	0.01 Hz	±( 0.5%rdg+5dgts)	5A	1100A
1KHz	0.1 Hz	±( 0.5%rdg+5dgts)	5A	1100A

Frequency ( Hz )（Autorange only for voltage）

Range	Resolution	Accuracy	Sensitivity	Overload protection
100 Hz	0.01 Hz	±( 0.1%rdg+2dgts)	100mV	660Vrms
1KHz	0.1 Hz
10KHz	0.001KHz
100KHz	0.01 KHz
800KHz	0.1 KHz		1V

Resistance ( Ω )（Autorange ＆ Manual）

Range	Resolution	Accuracy	Open circuit Voltage	Overload protection
400Ω	0.1Ω	±( 1%rdg+5dgts)	≦0.5 VDC	660Vrms
4KΩ	0.001KΩ	±( 1%rdg+3dgts)
40KΩ	0.01 KΩ
400KΩ	0.1 KΩ
4MΩ	0.001MΩ
40MΩ	0.01 MΩ	±( 1.5%rdg+3dgts)

Audible Continuity

Range	Continuity beeper	Open Circuit Voltage	Overload protection
	≦40Ω	≦0.5V	660Vrms

Diode test

Range	Resolution	Accuracy	Overload protection
	0.001V	±( 1%rdg+2dgts )	660Vrms

SPECIFICATIONS
Numerical Display        ：3 3/4 digit liquid crystal display (LCD) maximum reading 3999.
Range Selection          ：All ranges are selected by a single range switch.
Over Range Indication：LCD will show a "4" flashing in the highest position accompanied with a
                                         continuous beeping. (except for ranges of 1000A AC , and 600VDC 600VAC ).
LowBattery Indication：The

is displayed when the battery voltage drops below the    operating voltage.
  Sampling Rate            : 20 times/sec ( Barograph )    2 times/sec (Digital Display)
Power Source             ：one 006p 9V or IEC 6F22or NEDA 1604 Battery.
Battery Life                  ：300hr approx. (Alkaline)
Polarity                        ：Automatic polarity "–" display for negative input.
Auto power off time ：Approx. 30 minutes.
Operating Temperature：0℃ to 50℃
and Humidity               (32℉ to 122℉) below 80%RH
StorageTemperature ：-10℃ to 60℃ and Humidity (14℉ to 140℉) below 70%RH
Dimensions                 ：239(L)x66(W)x34(H)mm
Weight                         ：Approx. 430g

Please leave your enquiry here, we will reply as soon as possible.

Subscribe Newsletter