ElectroSmog Meter TES-92
Quantity
Product Features
- Frequency range 50MHz to 3.5GHz.
- 3 axis isotropic measurements of EMF.
- Non-directional (isotropic) measurement with
- three-channel measurement probe.
- High dynamic range.
- Configurable alarm threshold and memory function.
- Easy & safety to use.
ELECTRICAL SPECIFICATIONS
Sensor type |
Electric field (E). | |
| Frequency range | 50MHz to 3.5GHz | |
| Directional characteristic | Isotropic, 3-dimensional. | |
| Measurement range (CW signal > 50MHz) |
20mV/m to 108.0V/m , 53mA/m to 286.4mA/m , 1mW/m2 to 30.93W/m2 , 0mW/cm2 to 3.093mW/cm2 |
|
| Dynamic range | Typical 75dB | |
|
Absolute error (@1V/m and 50MHz) |
±1.0dB | |
| Frequency response (taking into account typ. CAL factor) |
±1.0dB (50MHz to 1.9GHz) ±2.4dB (1.9GHz to 3.5GHz) |
|
Isotropy deviation |
Typ. ±1.0dB for f >50MHz | |
| Overload limit | 10.61mW/cm2 (200V/m) | |
|
Temperature response (0 to 50℃) |
±0.2dB | |
GENERAL SPECIFICATIONS
| Measurement method | Digital, triaxial measurement |
| Directional characteristic | Isotropic, triaxial |
| Measurement range selection | One continuous range |
| Display resolution | 0.1mV/m, 0.1μA/m, 0.1μW/m2, 0.001μW/cm2 |
| Setting time | Typically 1s (0 to 90% of meas. value) |
| Display refresh rate | Typically 0.5 seconds |
| Display type | LCD 4 digit |
| Audible alarm | Buzzer |
| Measurement units | mV/m, V/m, mA/m, mA/m, mW/m2, mW/m2,W/m2, mW/cm2, mW/cm2 |
| Measurement display value | Instantaneous measured value, maximum value, average value, or maximum average value. |
| Measurement alarm function | Adjustable threshold with ON/OFF |
| Measurement calibration factor CAL | Adjustable |
| Manual data memory and read storage | 99 sets (only recall by meter) |
| Battery | 9V |
| Battery life | >15hours |
| Dimensions | Approx. 60(W) x 60(T) x 237 (L)mm |
| Weight (including battery) | Approx. 200g |
