Automatic Film Applicators
Quantity
The TQC Motorised Automatic film applicator or drawdown machine provides a reliable basis to apply coating films and slurries to test charts, panels or foils in a uniform and reproducible way in order to eliminate variations caused by human factors. Variations in speed, pressure and direction of draw down cause irregularities. Other factors that may influence the result are the shear rate and the weight of the applicator. With the TQC Automatic film applicator these variable factors are being stabilised. Over the complete surface the film thickness is even.
To prepare samples for testing rheological properties, abrasion resistance, hiding power and gloss the TQC Motorised Automatic film applicator is a must have. Motorised Film Applicators are also used in the adhesives industry.
AFA Features:
An optional drying time recording tool is available to convert the TQC automatic film applicator into a drying time recorder. The time range of the drying time recorder can be set digitally from 1 minute to 48 hours. The tool can be installed without any tools and can measure up to 8 channels in one run.
Heated Vacuumbed
The product is also available with an electrically heated vacuumbed. The temperature can be set digitally from ambient +5°C to ambient + 100°C . Heat-up time is short and temperature is uniform over the entire bed.
Multiple types of automatic film applicators are available for either glass/paper/metal substrates or foils. All models can be used in combination with standard block type film applicators such as bird/baker models,sagging and levelling testers or spiral bar type film applicators (wire wound rod type).
ORDERING INFORMATION
Art. No. AB3120
TQC motorised automatic film applicator 230VAC / 50Hz with glass bed and combined attachment assembly for standard block applicators and wire bar coaters.
Art. No. AB3125
TQC motorised automatic film applicator 110VAC / 50/60Hz with glass bed and combined attachment assembly for standard block applicators and wire bar coaters.
Art. No. AB3220
TQC motorised automatic film applicator 230VAC / 50Hz with perforated vacuum bed, built-in vacuum pump and combined attachment assembly for standard block applicators and wire bar coaters.
Art. No. AB3225
TQC motorised automatic film applicator 110VAC / 50/60Hz with perforated vacuum bed, built-in vacuum pump and combined attachment assembly for standard block applicators and wire bar coaters.
Art. No. AB3320
TQC motorised automatic film applicator 230VAC / 50Hz with double channelled vacuum bed, built-in vacuum pump and combined attachment assembly for standard block applicators and wire bar coaters.
Art. No. AB3325
TQC motorised automatic film applicator 110VAC / 50/60Hz with double channelled vacuum bed, built-in vacuum pump and combined attachment assembly for standard block applicators and wire bar coaters.
Art. No. AB3400
TQC motorised automatic film applicator 230VAC / 50Hz with heated perforated vacuum bed, built-in vacuum pump and combined attachment assembly for standard block applicators and spiral bar coaters
Art. No. AB3405
TQC motorised automatic film applicator 110VAC / 50/60Hz with heated perforated vacuum bed, built-in vacuum pump and combined attachment assembly for standard block applicators and spiral bar coaters
To prepare samples for testing rheological properties, abrasion resistance, hiding power and gloss the TQC Motorised Automatic film applicator is a must have. Motorised Film Applicators are also used in the adhesives industry.
AFA Features:
- Digital setting of speed, start position, stop position and stroke length .
- Wide speed range of 0-500 mm./ sec.
- Silent build-in vacuum pump with selected models with vacuum bed.
- Electronic vacuum area (A4/A3) selection eliminates the need for taping holes.
- Tool carrier height can be increased to allow coating of thicker panels / samples.
- Vacuum bed or glass bed can removed without tools for cleaning.
- Automatic spiral bar-coater retriever.
- Extensive safety measures through emergency stop and proximity sensors complies with all relevant standards.
An optional drying time recording tool is available to convert the TQC automatic film applicator into a drying time recorder. The time range of the drying time recorder can be set digitally from 1 minute to 48 hours. The tool can be installed without any tools and can measure up to 8 channels in one run.
Heated Vacuumbed
The product is also available with an electrically heated vacuumbed. The temperature can be set digitally from ambient +5°C to ambient + 100°C . Heat-up time is short and temperature is uniform over the entire bed.
Multiple types of automatic film applicators are available for either glass/paper/metal substrates or foils. All models can be used in combination with standard block type film applicators such as bird/baker models,sagging and levelling testers or spiral bar type film applicators (wire wound rod type).
ORDERING INFORMATION
Art. No. AB3120
TQC motorised automatic film applicator 230VAC / 50Hz with glass bed and combined attachment assembly for standard block applicators and wire bar coaters.
Art. No. AB3125
TQC motorised automatic film applicator 110VAC / 50/60Hz with glass bed and combined attachment assembly for standard block applicators and wire bar coaters.
Art. No. AB3220
TQC motorised automatic film applicator 230VAC / 50Hz with perforated vacuum bed, built-in vacuum pump and combined attachment assembly for standard block applicators and wire bar coaters.
Art. No. AB3225
TQC motorised automatic film applicator 110VAC / 50/60Hz with perforated vacuum bed, built-in vacuum pump and combined attachment assembly for standard block applicators and wire bar coaters.
Art. No. AB3320
TQC motorised automatic film applicator 230VAC / 50Hz with double channelled vacuum bed, built-in vacuum pump and combined attachment assembly for standard block applicators and wire bar coaters.
Art. No. AB3325
TQC motorised automatic film applicator 110VAC / 50/60Hz with double channelled vacuum bed, built-in vacuum pump and combined attachment assembly for standard block applicators and wire bar coaters.
Art. No. AB3400
TQC motorised automatic film applicator 230VAC / 50Hz with heated perforated vacuum bed, built-in vacuum pump and combined attachment assembly for standard block applicators and spiral bar coaters
Art. No. AB3405
TQC motorised automatic film applicator 110VAC / 50/60Hz with heated perforated vacuum bed, built-in vacuum pump and combined attachment assembly for standard block applicators and spiral bar coaters
