GL100
GL100 GL 100 Data Acquisition Equipment Malaysia, Selangor, Kuala Lumpur (KL) Supplier, Suppliers, Supply, Supplies | Obsnap Instruments Sdn Bhd
Quantity

Flexible input module allows wide range of measurements

The GL100 series announces support for additional sensors in volatile wireless and non-wireless environments with ability to exchange input module.

Main body

  • GL100-WL
    (with WLAN)
  • GL100-N
    (without WLAN)

GL100 are using the Wireless LAN (WLAN) of the IEEEE802 standards. Area that can use it is limited by the Wireless Telegraphy Act in the region.

Input modules

  • Measuring the Temperature, Humidity, Acceleration, Carbon dioxide (CO2), Illuminance, UV, AC current, Voltage

Easy measurement by multifunction input

The input module can be expanded to accommodate a wide variety of measurements

Dual port adapter connects up to two modules for simultaneous interface

  • GL100-WL / N

    • Dual port adapter
    • Temp./Humidity sensor
    • Illuminance/UV sensor

  • GL100-WL / N

    • Dual port adapter
    • Temp./Humidity sensor
    • Carbon dioxide sensor

  • GL100-WL / N

    • Dual port adapter
    • Illuminance/UV sensor
    • Carbon dioxide sensor

It is not able to connect two sensors of the same type.

Providing a variety of sensors and input terminals corresponding to the application.

There is the following input module.

Number of channels and measurement type are fixed with each input module.

Sensor
No. Input module Measurement (actual sensing) Measurement (calculated value)
1 Temp./Humidity sensor
GS-TH
Temperature (-20 to 85 ºC),
Humidity (0 to 100 % RH)
Accumulated temperature,
Dew-point temperature
2 Acceleration/Temp. sensor
GS-3AT
Acceleration in 3-axis (max. 10 G),
Temperature (-10 to 50 ºC)
N/A
3 Illuminance/UV sensor
GS-LXUV
Illuminance (max. 200 k lx),
UV intensity (max. 30 mW/cm2)
Accumulated Illuminance,
Accumulated UV intensity
4 Carbon dioxide sensor
GS-CO2
CO2 concentration
(max. 9999 ppm)
N/A

Input terminals / Adapter
No. Input module Measurement (actual sensing) Measurement (calculated value)
5 Voltage/Temp. input module
GS-4VT
Voltage (max. 50 V) or Temp. (TC: K/T type) of 4 ch,
Logic or Pulse of 4 ch
6 Temperature input terminal
GS-4TSR
Thermistor (max. 120 ºC) of 4 ch,
Logic or Pulse of 4 ch
7 Thermistor sensor
GS-103AT-4P
Temperature sensor (-40 to 105 ºC), Normal type
use with GS-4TSR module
8 Thermistor sensor
GS-103JT-4P
Temperature sensor (-40 to 120 ºC), Ultrathin type
use with GS-4TSR module
9 AC current sensor adapter
GS-DAP-AC
AC current,
2 sensors are able to connect (*1)
Power (instantaneous),
Integrated power (Electric energy)
10 AC current sensor
GS-AC50A
Clamp-on type (max. 50 A AC),
use with GS-DAP-AC module
11 AC current sensor
GS-AC100A
Clamp-on type (max. 100 A AC),
use with GS-DAP-AC module
12 AC current sensor
GS-AC200A
Clamp-on type (max. 200 A AC),
use with GS-DAP-AC module
*1:
it is required to use the same type sensor and it is used in the same power system of the single- or three-phase.

Packages will include combined models best suited for your application

GL100 will feature package solutions that combines several sensors and modules together for a one stop solution as an out-of-box-ready item for the specific application that best fits yor need.

  • Combo models for GL100-WL
  • Temp./Humidity Set: GL100-WL-THGL100-WL & GS-TH
  • Acceleration Set: GL100-WL-3ATGL100-WL & GS-3AT
  • Voltage/Temp. Set: GL100-WL-4VTGL100-WL & GS-4VT
  • Thermistor Set: GL100-WL-4TSRGL100-WL & GS-4TSR
    * Thermistor sensor is not included.
  • Combo models for GL100-N
  • Temp./Humidity Set: GL100-N-THGL100-N & GS-TH
  • Acceleration Set: GL100-N-THGL100-N & GS-3AT
  • Voltage/Temp. Set: GL100-N-4VTGL100-N & GS-4VT
  • Thermistor Set: GL100-N-3TSRGL100-N & GS-3TSR
    * Thermistor sensor is not included.

Available the software for PC & Smart devices

The GL100 is able to use with the PC or the Smart devices. The data on the GL100 can be monitored using the software.

General-purpose software for PC

General purpose application software will continue to have the ability to view in Y-T chart, waveform, and digital values. It is able to be also controlled the GL100 in real-time.

General-purpose software for the Smart devices

General purpose application software has the ability to view in Y-T chart and digital values. The displayed information will be refreshed by request. The simple settings of GL100 are able to control.

* It is available for the Android OS and the iOS in the Google Play or App Store.
  Supported OS : Android 4.1 to 6.0, iOS 7 / 8 / 9 (up to 9.3.4)

The most recent captured data is displayed in the digital value, trend graph or the alarm history. It is updated by operation of synchronous.

Industry-specific software (for PC and Smart device)

The new industry-specific customize software will feature targeted software in accommodating users with indicators that are specific and familiar to that industry.

  • AgricultureIndicators of plant growth
  • LogisticsIndicators of safe transportation and storage
  • PowerIndicators of electric energy

* It is available to download at the autumn of 2014

Specific-industry Measurement capability Description
Agriculture
  • Temperature Accumulation
  • Humidity Deficit
  • Amount of solar radiation
  • Amount of ultraviolet rays
Confirm temperature accumulation, humidity deficit, solar radiation, ultraviolet rays as part of the vital indicators for healthy plant growth. Measure optimal saturation deficit by understanding the best conditions applied for growth, flowering, and fruiting using temperature accumulation and optimal growth environment scheme.
Logistics
  • Search and display
    acceleration thresholds
  • Temperature Accumulation
  • Humidity Deficit
Transpiration of industrial equipment, temperature controlled transport of food, and warehouse temperature management can all be monitored to provide the safest and secured operation. Safety measurements through monitoring the vibration of the transport vehicles can be vital to heavy-industrial and vibration sensitive equipment. Accumulated temperature monitoring and humidity levels will be vital to keeping food fresh in a controlled environment.
Power measurement
  • AC current
  • Power
  • Integrated power
Power and electric energy levels will be displayed on the graph using measured AC current locally at the factory, buildings and industrial equipment. Corresponds to three power systems including two-wire single-phase, three-wire single-phase, or three-wire in three-phase.


Possible to check the data in multiple method

Wireless access will support multiple configurations for both secured and world wide internet access.

The following configuration is available to communicate with the GL100. The available function varies by the configuration.

Configuration Case 1

Direct connection (peer-to-peer) with no LAN connection

Configuration Case 2 *1

Local area network (LAN) with no Internet connection

Configuration Case 3 *1

Local area network (LAN) with Internet connection

Available functions Configuration Case 1 Configuration Case 2 Configuration Case 3
PC (#1) Smart
device (#1)
PC (#2) *1 Smart
device (#2)
PC (#3) *1 Smart
device (#3)
PC (#4) Smart
device (#4)
Control of full functions Ο   Ο   Ο   Δ*2  
Control of simple functions
(Start/Stop, Sampling, Alarm)
  Ο   Ο   Ο   Δ*2
Display Waveform/Digital value Ο Ο Ο Ο Ο Ο Δ*2 Δ*2
Save data to PC Ο   Ο   Ο   Δ*2  
Receive message via email         Ο Ο Ο Ο

Ο:Function is available. Δ:Function is available in the condition.

Note:

*1:
Multiple PC cannot make connection to the same GL100 simultaneously.
*2:
Assign a static global IP. Or DDNS service must be available within network and the GL100 configured as a device within the WAN.
*
When the router has the static IP address, it is able to access from the Internet (WAN) using the static IP address.
*
When the DDNS (Dynamic Domain Name Server) is used, the ISP provide the DDNS service and the router supports the DDNS. The router will have the domain name. It is able to access from the Internet (WAN) using the domain name.



Reliable measurement with useful functions

Sufficient capacity of data

The captured data is able to save to the built-in memory or the microSD memory card. It has sufficient capacity of data.

Data Capturing Time
Condition:
Using with Temp/Humidity sensor (GS-TH) by 1 minute sampling interval.
Destination Capturing time
Built-in memory (approx. 4.9 MB) Approx. 254 days
microSD memory card Over 2 years
*
File size for captured data is up to 1.9GB on the microSD memory card.

Available battery operation

The GL100 can be operated with batteries or USB bus-power. The power of the GL100 is automatically switched between the battery and the USB bus-power.

Battery Operating Time
Condition:
Using with Temp./Humidity sensor (GS-TH), 1 minute sampling interval, Alkaline battery (AA size x 2). The microSD memory card is not installed.
Condition Operating time
When saving data to the built-in memory with WLAN disabled Approx. 2 weeks
*
The operating time varies by the environmental condition.
*
USB power source will be required for Voltage/Temp. (GS-4VT) and CO2 sensor (GS-CO2).
Recommended power source for the sensor module
Measurement items Input module Driven by battery (*2) Powered by USB (*4)
Temp. & Humidity GS-TH Available Available
Acceleration & Temp. GS-3AT Available Available
4ch, Voltage or Temp GS-4VT (*3) Available
4ch, Temp. (Thermistor) GS-4TSR Available Available
Illuminance & UV GS-LXUV Available Available
Carbon dioxide (CO2) GS-CO2 N/A Available
AC Current & Power GS-DPA-AC Available Available
Temp./Humidity + CO2 GS-DPA(*1) + GS-TH + GS-CO2 N/A Available
Temp./Humidity + Illuminance/UV GS-DPA(*1) + GS-TH + GS-LXUV Available Available
CO2 + Illuminance/UV GS-DPA(*1) + GS-CO2 + GS-LXUV N/A Available

Note;

*1:
GS-DPA (Dual Port Adapter) is used for connecting two sensors.
*2:
When GL100 is driven by the USB bus-power, power is automatically switched to battery after USB bus-power is down. If the capacity of the battery is low, the power of GL100 may be turned off. The battery is able to use as an auxiliary power of a power failure of the USB bus-power. In this case, it is recommended to install new battery to GL100.
*3:
It is able to drive by battery. In this case, an operating time will be shorter because power consumption is relatively high.
*4:
When AC adapter for the USB device is used, it is recommended to have power capacity of the 200mA except to use the GS-CO2 sensor. The power capacity of the 1A is required for using the GS-CO2 sensor.

Functions of email

The GL100-WL is able to transferring email and receiving email. The warning and other messages
are transferred from the GL100-WL. The command of simple control for the GL100-WL can be received.

You do not need to sensitive for the measured values at all times because you are able to have the better understanding of the situation by receiving email from the GL100.

  • Warning message for the captured data (When the alarm occurs, message is sent via email.)
  • Summary data (Sending summary data in specified period that are the current value, value of maximum, minimum, and average.)
  • Low battery warning (If the level of dry cell is low, message is sent.)
  • Confirmation of setting change (When the settings has been changed, message is sent.)

You can change simple setting using the software for the smart drive. The simple setting is the start/stop, sampling and alarm. (The setting change commands are transferred using the email function.)

Setting of capture condition in the GL100 can be changed by receiving command by email.
(Setting change may be delayed. It varies by condition of communication for the email.)








Typical applications

The typical applications using the GL100 series are the following. GL100 series can be used for a variety of purposes in a wide variety of applications.

  • Monitoring Power

    Industry:
    Maintenance
    Business sector:
    Maintenance, Upkeep
    Recommended model:
    GL100-WL/N
    Description:
    Monitor the power of high power equipment for maintenance and saving energy.

    In In this example, the power of the air conditioner of building is monitors in offline. History of the amount of power is checked periodically.

  • Safety transportation of the cargo

    Industry:
    Transportation
    Business sector:
    Quality management
    Recommended model:
    GL100-WL/N
    Description:
    Confirm the vibration of the cargo. Safety measurements through monitoring the vibration of the transport vehicles can be vital to heavy-industrial and vibration sensitive equipment.

    In In this example, the acceleration on cargo bed of the track is measured. The data is checked in office or warehouse. The time and value that acceleration exceeds the threshold are displayed in the list.

  • Horticulture

    Industry:
    Horticulture
    Business sector:
    Management
    Recommended model:
    GL100-WL
    Description:
    Monitor the vital indicators for healthy plant growth. Creates the best conditions applied for growth, flowering, and fruiting using temperature accumulation and optimal growth environment analysis.

    In In this example, the Temperature, Humidity, Carbon dioxide (CO2), Illuminance, and UV are measured for it. When alarm is occurred, the warning message is transferred via email.

  • Remote monitoring of equipments

    Industry:
    Heavy machine, Heavy equipment
    Business sector:
    Service, Support
    Recommended model:
    GL100-WL
    Description:
    Monitor the operating condition of the equipment located in many place at one place. It makes shorter time to find the problem, and then service technician will be able to take action at an earlier time.
    Note:
    Assign a static global IP to router of each location. Or DDNS service must be available within network.



Specification











Options and supplies



Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version