TES-593
TES-593 Magnetic Field Meter - EMF Tester Climatic / Environment Inspection Malaysia, Selangor, Kuala Lumpur (KL) Supplier, Suppliers, Supply, Supplies | Obsnap Instruments Sdn Bhd
Quantity
Product Features
  • Frequency range 10MHz to 8.0GHz
  • 3 axis isotropic measurements of EMF
  • Non-directional (isotropic) measurement with three-channel measurement probe
  • High dynamic range
  • Configurable alarm threshold and memory function
  • Easy & safety to use
Specification

ELECTRICAL SPECIFICATIONS

Sensor type Electric field (E)
Frequency range 10MHz to 8GHz
Directional characteristic Isotropic, 3-dimensional
Measurement range
(CW signal>10MHz)
20mV/m to 108.0V/m
53mA/m to 286.4mA/m
1μW/m2 to 30.93W/m2
0μW/cm2 to 3.093mW/cm2
Absolute error
(@1V/m and 10MHz)
± 1.0dB
Frequency response
(taking into account typ. CAL factor)
± 1.0dB (10MHz to 1.9 GHz)
± 2.4dB(1.9GHz to 8GHz)
Isotropy deviation Type. ±1.0dB ì¶ f>10 MHz
Overload limit 10.61mW/cm2 (200 V/m)
Temperature response
(0 to 50 ¡æ)
± 0.5dB

GENERAL SPECIFICATIONS

Measurement method Digital , triaxial measurement
Directional characteristic Isotropic, triaxial
Measurement range selection One continuous range
Display resolution 0.1mV/m, 0.1μA/m, 0.1μW/m2, 0.001μW/cm2
Setting time Typically 1s ( 0 to 90% of meas. value)
Display refresh rate Typically 0.5Sec.
Display type LCD 4 digit
Audible alarm Buzzer
Measurement units mV/m , V/m , μA/m , mA/m , μW/m2, mW/m2, μW/cm2
Measurement display value Instantaneous measured value, maximum value,
average value or maximum average value
Measurement alarm function Adjustable threshold with ON/OFF
Measurement calibration factor CAL Adjustable
Manual data memory and read storage 99 sets ( only recall by meter )
Battery 9V
Battery life >15 hours
Dimensions Approx. 67(W) x 60(T) x 247(L) mm
Weight Approx. 260g (including battery)
Accessory 9V battery, carrying case, manual

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version