TQC sheen - Viscosity Cup DIN 53211 with Interchangeable Nozzle
Quantity
The TQC Viscosity Cup DIN 53211 with Interchangeable Nozzle consist of a wide range viscosity cups to measure the viscosity of paint, lacquers and other fluids. Very precize, with fixed stainless steel nozzle. The TQC Viscosity Cup DIN 53211 with Interchangeable Nozzle is available in titanium anodized aluminium and stainless steel. Widly used in laboratory, to be used with stand.
Features:
ORDERING INFORMATION
Art. No. VF2020
TQC Viscosity Cup DIN 53211 with Interchangeable Nozzle
Type: made of anodised aluminum, to be used with interchangeable nozzles. Complete with stainless steel nozzle retainer. Nozzles to be orderded seperately are listed below.
Art. No. VF2181
TQC Interchangeable Nozzle for Viscosity Cup VF2020, orifice Ø 1 mm (Similar to DIN 53211)
Art. No. VF2022
TQC Interchangeable Nozzle for Viscosity Cup VF2020, orifice Ø 2 mm (Similar to DIN 53211)
Art. No. VF2023
TQC Interchangeable Nozzle for Viscosity Cup VF2020, orifice Ø 3 mm (Similar to DIN 53211)
Art. No. VF2024
TQC Interchangeable Nozzle for Viscosity Cup VF2020, orifice Ø 4 mm
Optional: possible to certify by calibration with certified oils
Art. No. VF2025
TQC Interchangeable Nozzle for Viscosity Cup VF2020, orifice Ø 5 mm (Similar to DIN 53211)
Art. No. VF2026
TQC Interchangeable Nozzle for Viscosity Cup VF2020, orifice Ø 6 mm (Similar to DIN 53211)
Art. No. VF2027
TQC Interchangeable Nozzle for Viscosity Cup VF2020, orifice Ø 7 mm (Similar to DIN 53211)
Art. No. VF2028
TQC Interchangeable Nozzle for Viscosity Cup VF2020, orifice Ø 8 mm (Similar to DIN 53211)
Features:
- A relatively deep well surrounding the top of the cup serves to catch any overflow.
- The design of the cup and orifice eliminate hard to clean recesses.
- The outside dimensions have been chosen to support the TQC stands.
- TQC viscosity cups are made under the continuing quality control procedures.
- Each cup is provided with an engraved unique serial number.
| Cup | Titanium anodized aluminum, 100cc |
| Nozzle retainer | Stainless steel |
| Nozzle | Interchangeable (not incl.) |
| According to | DIN 53211(with orifice 4 mm, other orifice similar to DIN 53211) |
| Weight | 226 g |
| Max. Width | 84mm |
| Height | 74mm |
ORDERING INFORMATION
Art. No. VF2020
TQC Viscosity Cup DIN 53211 with Interchangeable Nozzle
Type: made of anodised aluminum, to be used with interchangeable nozzles. Complete with stainless steel nozzle retainer. Nozzles to be orderded seperately are listed below.
Art. No. VF2181
TQC Interchangeable Nozzle for Viscosity Cup VF2020, orifice Ø 1 mm (Similar to DIN 53211)
Art. No. VF2022
TQC Interchangeable Nozzle for Viscosity Cup VF2020, orifice Ø 2 mm (Similar to DIN 53211)
Art. No. VF2023
TQC Interchangeable Nozzle for Viscosity Cup VF2020, orifice Ø 3 mm (Similar to DIN 53211)
Art. No. VF2024
TQC Interchangeable Nozzle for Viscosity Cup VF2020, orifice Ø 4 mm
Optional: possible to certify by calibration with certified oils
Art. No. VF2025
TQC Interchangeable Nozzle for Viscosity Cup VF2020, orifice Ø 5 mm (Similar to DIN 53211)
Art. No. VF2026
TQC Interchangeable Nozzle for Viscosity Cup VF2020, orifice Ø 6 mm (Similar to DIN 53211)
Art. No. VF2027
TQC Interchangeable Nozzle for Viscosity Cup VF2020, orifice Ø 7 mm (Similar to DIN 53211)
Art. No. VF2028
TQC Interchangeable Nozzle for Viscosity Cup VF2020, orifice Ø 8 mm (Similar to DIN 53211)
