TIME3100 Surface Roughness Tester
TIME3100 Surface Roughness Tester Roughness Gauge Surface Roughness, Profile / Cleanliness Inspection Malaysia, Selangor, Kuala Lumpur (KL) Supplier, Suppliers, Supply, Supplies | Obsnap Instruments Sdn Bhd
Quantity

TIME3100 Surface Roughness Tester

Roughness Parameter(Ra, Rz)

Cut-off Lengths(0.25mm/0.8mm/2.5mm)

Accuracy(±15%)

 
 
 
Leave a message

 

Product Introduction

Portable Surface Roughness Tester - TIME3100 is a pocket-sized economically priced instrument for measuring surface texture conforming to traceable standards. It can be used on the shop floor in any position, horizontal, vertical or anywhere in between.

The large LCD display shows either roughness parameter Ra or Rz at the touch of a button, combined with the selected cut-off length. External calibration of roughness values is possible by means of a special CAL button, which makes adjustment of this instrument very easy. A beep signal informs the user of each individual measurement status when ready.

The easy to use TIME3100 operates on various surfaces, not only flat but also outer cylinder, outer cone, grooves, and recesses greater than 80 X 30mm. The areas of application are wide spread. This unit is most suitable for inspection departments, quality control, on the shop floor during machining, assembly and on-site.

TIME3100 determines both roughness parameters Ra and Rz within a wide measuring range (See specifications below). The piezo-electric pick-up stylus with diamond tip assures a very reliable measurement within tolerances in conformance with ISO Class 3. Ra parameter is in conformance to ISO while Rz conforms to DIN standards


Features

ˇńPocket-size & economically price

ˇńLarge measuring range suitable for most materials

ˇńMeasures flat, outer cylinder and sloping surface

ˇńBoth Ra and Rz parameters in one instrument

ˇńFeatures external calibration at keyboard

ˇńStandard conform to ISO and DIN

ˇńRechargeable batteries, work while charging


Technical Specification

Model TIME3100
Roughness parameter Ra, Rz
Tracing length 6mm
Tracing speed 1.0mm/sec
Cut-off lengths 0.25mm/0.8mm/2.5mm
Evaluation length 1.25mm/4.0mm/5.0mm
Measuring range Ra: 0.05-6.5μ
Rz: 0.1-50μ
Accuracy ±15%
Repeatability <12%
Filter RC analogue
Pick-up Piezoelectric
Radius and angle of the stylus point Diamond, Radius : 10±2.5μ 
Angle: 90°(+5°or  -10°)
Operating temperature 0-40ˇć
Relative humidity <90%
Storing temperature -25ˇć -60ˇć
Vertilation Grade 3
Power supply 3.7V Li batteries
Backlight No
Charger DC 9V, 8 - 12 hours (recharging time)
Dimensions (L×W×H) 116×86×30mm
Weight 200g

 

 


Standard Delivery

ˇńMain unit

ˇńProtection cover for pickup

ˇńSpecimen Ra

ˇńCharger

ˇńTIME certificate

ˇńInstruction manual

ˇńWarranty card


Optional Accessories

ˇńVarious Ra specimen: 0.1μm, 0.2μm, 0.4μm, 0.8μm, 3.2μm

Industry Application
There is a report analyzes every business who uses the tester, and enumerate the customers especial Time’s customers in order to comprehend the using of the testers in every industries more deeply.
1. Firstly, the mechanical manufacturing industry, mostly the manufacture of metal. The primary function of roughness tester is testing the surface roughness of processing parts especially the pot-ball roughness tester is adept to testing the hard surface. For example the automobile parts manufacturing, mechanical parts manufacturing, etc. the roughness tester is essential in every manufacturing industry engaged in quality of parts surface.
2. Secondly, the industry of manufacture of non-metal. As the development of science and technology, more and more new materials are used in manufacturing techniques, for example, pottery, plastic, polyethylene, etc. now some bearings are made in special pottery, and some pump valves are made in polyethylene. These materials all have firm character, and some of them can be made into parts instead of metal. Their surface roughness also needs testing in manufacture.
3. As the technology and function of the roughness tester being perfected, besides the mechanical processing, surface roughness testing is also used in electric power, communication and electron, so much as stationery, dishware and the surface of one’s teeth.

TIME3100 can be used in the following industries:
a)  Manufacturing of cars and spare parts
b)  Manufacturing of mechanical parts and gearing
c)  Facilities for metal processing and accessories and functional parts of lathe
d)  Technological equipment
e)  Universal machine and metal molding equipment
f)  Treatment of the surface
g)  Metallurgy, rolling and forging equipment
h)  Pneumatic and hydraulic elements and pressure vessel
i)  Foundry of mould, close manufacture
j)  Press, packing, light industry and spinning machine, and medical appliance
k)  Petroleum, chemical engineering, coal and cement machine, and agriculture mechanism
l)  Grain and oil, food, beer machine and pharmaceutical machine
m)  Equipments of electric power, auto-control, electronic communication
n)  Aviation and space-flight business, military industry
o)  Universities, institutes
p)  Paper-making business
q)  Industry ceramics, piezoelectric ceramics, electric ceramics, porcelain, high-aluminum ceramic stick
r)  Business of rubber, epoxy, polyethylene
s)  Canal of liquid, compound glass fiber silence-tube
t)  Alloy doors and windows, handle of door, parts of chair, surface of stainless steel cup and dishware, exterior of taps
u)  Crystal, carbon silicon, graphite, film of diamond, magnet
v)  Chromeplating batteryŁ¬canister of telescope
w)  Copper-foil stationry, hard alloy ball, base for ball, auto-pencil lead
x)  Medical nursing
y)  Clothing-making machine
 
Warranty
We provide 12-month warranty on the main unit.
 
Note
Per the updating of product appearance, please take the material object as the standard.


Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version