Standard gage - Internal micrometers - Three-point micrometers, internal, inch
Quantity
Application range 0.275 in to 4 in
¡ö Measure close to the bottom of blind bores.
¡ö Allow access to deep holes using an extension delivered in standard.
¡ö Carbide-tipped contact points for measuring application 0.5 ÷ 4 in.
¡ö Supplied in a suited case along with setting ring, extension rod, inspection report.
| Order number |
Measuring range |
Scale division | Precision |
Setting rings |
L1 | A |
Extension rods |
| Inch models | in | in | in | in | in | in | in |
| 00924001 | 0.275 ÷ 0.35 | 0.0001 | 0.00016 | 0.275 | 2.14 | 0.02 | 4 |
| 00924002 | 0.35 ÷ 0.425 | 0.0001 | 0.00016 | 0.350 | 2.14 | 0.02 | 4 |
| 00924003 | 0.425 ÷ 0.5 | 0.0001 | 0.00016 | 0.500 | 2.14 | 0.02 | 4 |
| 00924004 | 0.5 ÷ 0.65 | 0.0002 | 0.00016 | 0.65 | 3.2 | 0.02 | 6 |
| 00924005 | 0.65 ÷ 0.8 | 0.0002 | 0.00016 | 0.65 | 3.2 | 0.02 | 6 |
| 00924006 | 0.8 ÷ 1 | 0.0002 | 0.00016 | 1 | 3.6 | 0.02 | 6 |
| 00924007 | 1 ÷ 1.2 | 0.0002 | 0.00016 | 1 | 3.6 | 0.02 | 6 |
| 00924008 | 1.2 ÷ 1.6 | 0.0002 | 0.00016 | 1.6 | 3.88 | 0.02 | 6 |
| 00924009 | 1.6 ÷ 2 | 0.0002 | 0.00020 | 1.6 | 3.88 | 0.02 | 6 |
| 00924010 | 2 ÷ 2.5 | 0.0002 | 0.00020 | 2.5 | 4.56 | 0.02 | 6 |
| 00924011 | 2.5 ÷ 3 | 0.0002 | 0.00020 | 2.5 | 4.56 | 0.02 | 6 |
| 00924012 | 3 ÷ 3.5 | 0.0002 | 0.00020 | 3.5 | 4.56 | 0.02 | 6 |
| 00924013 | 3.5 ÷ 4 | 0.0002 | 0.00020 | 3.5 | 4.56 | 0.02 | 6 |
