The RD product line furnaces convince with their unbeatable price-performance ratio, very compact outer dimensions and their low weight. These all-rounders are equipped with a working tube which also serves as support for the heating wires. Thus, the working tube is part of the furnace heating which has the advantage that the furnaces achieve very high heat-up rates. The furnaces can be supplied for 1100 °C or 1300 °C.

All models are designed for horizontal application. If the customer requires protective gas atmosphere, a separate working tube, e.g. made of quartz glass, must be inserted in the working tube.

• Tmax 1100 °C or 1300 °C
• Dual shell housing made of sheets of textured stainless steel
• Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2
• Inner diameter of the tube: 30 mm, heated length: 200 mm
• Working tube made of C 530 material including two fiber plugs as standard
• Thermocouple type K (1100 °C) or type S (1300 °C)
• Solid state relays provide for low-noise operation of the heating
• Heating wires wound directly around the working tube resulting in very fast heat-up rates
• Defined application within the constraints of the operating instructions

• Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
• Gas supply system for non-flammable protective or reactive gas

R 50/250/12 - R 170/1000/13

These compact tabletop tube furnaces with integrated control systems can be used universally for many processes. Equipped with a standard working tube of C 530 ceramic and two fibre plugs, these furnaces have an unbeatable price/performance ratio.

• Tmax 1200 °C or 1300 °C
• Single-zoned design as standard
• Dual shell housing made of sheets of textured stainless steel
• Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2
• Outer tube diameter of 50 mm to 170 mm, heated length from 250 mm to 1000 mm
• Working tube of C 530 ceramic including two fiber plugs as standard equipment
• Tmax 1200 °C: Type N thermocouple
• Tmax 1300 °C: Type S thermocouple
• Solid state relays provide for low­noise operation
• Defined application within the constraints of the operating instructions
• NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

• Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
• Charge control with temperature measurement in the working tube and in the furnace chamber outside the tube
• Three-zoned design (heated length from 500 mm)
• Gas supply systems for protective gas or vacuum operation
• Process control and documentation via VCD software package for monitoring, documentation and control