Tube Furnaces with Stand for Horizontal or Vertical Operation
Quantity
View old post here.
RT 50-250/11 - RT 30-200/15
RT 50-250/11 - RT 30-200/15
These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, and their compact design, also make these furnaces suitable for integration into existing process systems.
- Tmax 1100 °C, 1300 °C, or 1500 °C
- Compact design
- Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2
- Vertical or horizontal operation freely adjustable
- Working height freely adjustable
- Working tube made of C 530 ceramic
- Type S thermocouple
- Operation also possible separate from stand if safety guidelines are observed
- Control system integrated in furnace base
- Defined application within the constraints of the operating instructions
- NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
| Model | Tmax °C | Outer dimensions in mm | Inner tube Ø mm | Heated length/mm | Length constant temperature ±5K | Tube length in mm | Connected load kW | Electrical connection | Weight in kg | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| W | D | H | |||||||||
| RT 50-250/11 | 1100 | 350 | 380 | 740 | 50 | 250 | 80 | 360 | 1.8 | single-phase | 25 |
| RT 50-250/13 | 1300 | 350 | 380 | 740 | 50 | 250 | 80 | 360 | 1.8 | single-phase | 25 |
| RT 30-200/15 | 1500 | 445 | 475 | 740 | 30 | 200 | 70 | 360 | 1.8 | single-phase | 45 |
