TQC Sheen - Wet Film Thickness Gauge - Wet Film Thickness Wheel NS100/300/600
Quantity
Specially by TQC developed instrument for use on wet lacquers, paint and coil coated surfaces. Equipped with a precision roller-bearing for smooth rolling over the surface . The wheel has three rims, the inner rim being eccentric to the two outer rims. The outer rings are notched for a firm grip inthe surface to prevent slipping. Made of stainless steel and with an aluminum grip.
INDUSTRY APPLICATION
Protective Coatings, Corrosion Control, Coating Laboratories, Paint Prodution, Decorative Coatings, Building Maintenance
ASTM D1212-91-(A), BS 3900-C5-1B, NF T30-125, ISO 2808, §¤OCT P 51694
SCOPE OF SUPPLY
Art. No. VF2255
Wet film thickness wheel, model: NS100, Range: 0-100µm, Division: 10µm, Diameter: 50mm. Graduation: 10µm
Art. No. VF2256
Wet film thickness wheel, model: NS300, Range: 0-300µm, Division: 30µm, Diameter: 50mm
Art. No. VF2257
Wet film thickness wheel, model: NS600, Range: 0-600µm, Division: 60µm, Diameter: 50mm
Art. No. VF2258
Wet film thickness wheel, model: NS1000, Range: 0-1000µm, Division: 25µm, Diameter: 50mm
INDUSTRY APPLICATION
Protective Coatings, Corrosion Control, Coating Laboratories, Paint Prodution, Decorative Coatings, Building Maintenance
USAGE
Hold the wheel by its central spindle. Begin at maximum thickness to reduce risk of inaccuracy caused by surface tension.
Roll the wheel through the wet film with the side 1 in the diagram touching the substrate. Roll for at least one whole turn and slowly enough for wetting to occur. Roll the wheel backwards by at least on complete turn. The wet film thickness is read from the scale, at the end of the wetted segment of the middle circle, 2 in the diagram
To use wheel on pipes, measure across the longitudinal axis (lengthways) of the pipe.
On rough surfaces, measurements will be made from the surface peaks and represent the minimum wet film thickness.
STANDARDSASTM D1212-91-(A), BS 3900-C5-1B, NF T30-125, ISO 2808, §¤OCT P 51694
SCOPE OF SUPPLY
- TQC Wet Film Thickness Wheel
- Leather pouch
- Calibration certificate
Art. No. VF2255
Wet film thickness wheel, model: NS100, Range: 0-100µm, Division: 10µm, Diameter: 50mm. Graduation: 10µm
Art. No. VF2256
Wet film thickness wheel, model: NS300, Range: 0-300µm, Division: 30µm, Diameter: 50mm
Art. No. VF2257
Wet film thickness wheel, model: NS600, Range: 0-600µm, Division: 60µm, Diameter: 50mm
Art. No. VF2258
Wet film thickness wheel, model: NS1000, Range: 0-1000µm, Division: 25µm, Diameter: 50mm
