TQC sheen - AUTOMATIC FILM APPLICATOR STANDARD
TQC sheen - AUTOMATIC FILM APPLICATOR STANDARD Film Applicators Coating / Paint Testing Malaysia, Selangor, Kuala Lumpur (KL) Supplier, Suppliers, Supply, Supplies | Obsnap Instruments Sdn Bhd
Quantity
The Automatic film applicator provides a reliable basis to apply coating films to test charts, panels or foils in a uniform and reproducible way in order to eliminate variations caused by human factors.

Reproducible

Variations in speed, pressure and direction of draw down cause irregularities. Other factors that may influence the result are the shear rate and the weight of the applicator. With the Automatic film applicator these variable factors are being stabilised. Over the complete surface the film thickness is even. Samples created with the Automatic film applicator are reproducible. It’s possible to produce a large number of identical laboratory precision draw downs in a short period of time.

Rheological properties

The quality of the applied film is important for research on rheological properties of the applied media. To prepare samples for testing rheological properties, abrasion resistance, hiding power and gloss the Automatic film applicator is a must have. Multiple types of automatic film applicators are available for either glass/paper/metal substrates or foils.

Block- and spiral applicators

All models can be used in combination with either standard block type film applicators such as bird/baker models, or spiral bar type film applicators (wire wound rod type) depending on the configuration chosen.

Unique Interface

Each Automatic Film Applicator ‘Standard’ is equiped with the Triple I ® Navigation Tool. The Triple I stands for Intelligent Illumination Interface. This unique navigation tool guides the operator through the interface of TQC Sheen lab-machines. At each step of the operating menu the interface detects which buttons are active and indicates these by means of an illuminated red centre. This results in a very intuitive operating system which is enhanced with information on the machine’s display.

Heated bed

The Automatic Film Applicator Standard with perforated heated vacuum bed has a built-in heating mat which allows the temperature of the table to be elevated up to +100°C above ambient temperature. The powerful heating device guarantees an even distribution of the temperature over the entire vacuum plate. Temperature is set and controlled by means of the Triple I ® Navigation tool

Specifications:

TRAVERSE SPEED

0.1 – 500 mm/s

TRAVERSE SPEED ACCURACY

+/- 1% of set speed

STROKE LENGTH

50 – 430mm / 1.97 – 16.93 in

STROKE LENGTH ACCURACY

+/- 2 mm / 0.08 in

MAX. TEST CHART SIZE

515 x 300 mm / 20.28 x 11.81 in

MAX. TEST CHART THICKNESS

9 mm / 0.35 in

MAX. TEST SUBSTRATE THICKNESS

35 mm / 1.38 in incl. coating

MAX. VACUUM AREA

DIN A3 / Scrub

AUTOMATIC VACUUM AREA

DIN A5, DIN A4, DIN A3, Scrub

WIRE BAR SPIRAL AREA

Max. 325 mm / 12.8 in

MIN. WIRE BAR LENGTH

345 mm / 13.58 in

MAX. WIRE BAR DIAMETER

10 mm / 0.39 in at fixation points

WIDTH OTHER APPLICATORS

Max. 300 mm / 11.81 in

HEIGHT OTHER FILM APPLICATORS

10 – 80 mm / 0.39 – 3.15 in

DIMENSIONS

490x640x290 mm / 19.92×25.2×11.42 in

MASS

33 kg

POWER

100 – 240VAC / 50 – 60Hz

POWER CONSUMPTION

Max. 50 Watt

DISPLAY

480 x 272 pixel TFT display

CONTROLS

5-key Navigation Switch, Mouse and Keyboard Optional


Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version