Nikon Metrology - ModelMaker MMDx
Nikon Metrology - ModelMaker MMDx Portable CMM Dimensional Metrology System Malaysia, Selangor, Kuala Lumpur (KL) Supplier, Suppliers, Supply, Supplies | Obsnap Instruments Sdn Bhd
Quantity
The ModelMaker MMDx handheld laser scanners are ideally suited for portable 3D inspection and reverse engineering applications. Their camera technology is a major leap forward in 3D laser scanning as they offer high frame rates and large stripe widths up to 200mm for ultra-productive scanning. MMDx incorporates Enhanced Sensor Performance (ESP3) to scan all sample materials and surface finishes without user intervention.

Key benefits
  • Faster and more accurate scanning saves money and time
  • Ergonomic, light and small scanner
  • Scans almost all industrial materials
  • Portable out-of-the box system
  • Easy and fast plug & play set-up
  • Designed for use in all shop floor conditions
  • Optimized for glossy or multi-material surfaces

Applications
  • Fast & accurate 3D digitizing
  • Part-to-CAD inspection: First article inspection against CAD model
  • Inspection of geometric features
  • Gap-and-flush inspection
  • Reverse engineering
  • Input for rapid prototyping

Specifications
  MMDx50 MMDx100 MMDx200
Accuracy 1,2 (1σ) 7 μm 10 μm 16 μm
Stripe width (Y) 50 mm 100 mm 200 mm
Measuring range (Z) 50 mm 100 mm 150 mm
Stand-off 95 mm 100 mm 110 mm
Min. point resolution 40 µm 65 µm 115 µm
Max. data rate 150 Hz
Enhanced Sensor Perform. ESP3 (real-time per point)
Warm up time 0 sec
Weight (approx.) 400 g
Laser power Class 2, 660nm
Field of View indicator Dot
Arm attachment External
 
1Typical values are 30% better than published values.
2Laser scanner Accuracy is determined by scanning a plane from various directions, each time using the entire scanner field of view. The result is the maximum 1ó deviation of the scan data to fitted plane features.

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version