Nikon Metrology - LC60Dx Dual-Purpose Scanner
Nikon Metrology - LC60Dx Dual-Purpose Scanner Portable CMM Dimensional Metrology System Malaysia, Selangor, Kuala Lumpur (KL) Supplier, Suppliers, Supply, Supplies | Obsnap Instruments Sdn Bhd
Quantity

The LC60Dx is actually easily interchangeable between CMMs and handheld localizers. As such, companies owning both fixed-bed CMMs and articulated arms can benefit from using a single LC60Dx scanner on both systems. In this way, they are able to execute most of the digitizing work using one scanner and compare e.g. measuring results from metrology room (CMM) and shopfloor (articulated arm).

Key benefits:

  • Save money by using one laser scanner for two different localizer types
  • Easy macro-based programming for CMM based applications
  • Plug-and-play capability on portable arms
  • Scans nearly all material surfaces (shiny, varying colours)
  • Seamless retrofit on most leading CMM brands
  • Point cloud analysis within single Focus software platform

Applications
  • 3D digitizing with high detail and speed
  • Complex surfaces (composites, blades, impellers, medical devices, etc)
  • Features (Slot, holes, studs, etc)
  • Portable / Fixed CMM scanning applications

Specifications

Probing error (MPEp)1 9 μm (0.0004”)
Ball bar length (MPEE)2 6+L/350(µm)
(0.00024+L/350) (')
Multi-stylus test (MPEAL)3 9 μm (0.0004”)
ISO Probing form error4 20 µm (0.00079”)
ISO Probing size error all5 30 µm (0.00118”)
ISO Probing dispersion value6 36 µm (0.00141”)
ISO Cone angle7 125°
Stripe width 60 mm (2.36”)
Scanning speed 75,000pts/s
Resolution 60μm (0.0024”)
Stand-off distance 95 mm (3.74”)
Field-of-View (FOV)
width and height
60x60 mm (2.36x2.36”)
Weight 390 g (0.86 lbs)
Interface on manual localizers Ethernet
Laser safety Class 2
Enhanced Scanner Performance ESP3
Daylight filter yes
Probe head compatibility PH10M, PH10MQ, CW43, PHS


All accuracy specifications valid for a CMM with an accuracy of 2µm + L/350 or better using manufacturer supplied test sphere
1Nikon Metrology test comparable to EN/ISO 10360-2 MPEP using 1 sigma sphere fit.
2Nikon Metrology test comparable to EN/ISO 10360-2 MPEE
3Nikon Metrology test comparable to EN/ISO 10360-5 MPEAL

Accuracy specifications according ISO 10360-8:2013:
4PForm.Sph.1x25:Tr:ODS,MPE : Maximum probing form error using 25 representative points in translatory scanning mode
5PSize.Sph.All:Tr:ODS,MPE : Maximum probing size error All using all measured points in translatory scanning mode
6PForm.Sph.D95%:Tr:ODS,MPL : Maximum probing dispersion value using 95% of the measured points in translatory scanning mode
7Cone angle : Region of sphere on which the measured points are selected

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version