The HI3512 is a highly accurate multiparameter benchtop meter that measures pH/ORP/ISE, EC/TDS/Resistivity/Salinity, and temperature with a clear and informative LCD display, data logging capability, and USB port for computer connectivity.
The HI3512 is a dual channel meter that allows for measurement of pH, ORP, and ISE on one channel and EC, TDS, resistivity and salinity, on the other. Readings for pH and EC can be manually or automatically compensated for temperature variations with the separate HI7662-T temperature probe or from the built-in temperature sensor of the conductivity probe on channel two.
As a pH meter the HI3512 can be calibrated up to five points with a choice of seven standard buffers or two custom buffers. For use as an ISE meter, a five-point calibration with six standard buffers can be performed. As an EC/TDS/Resistivity meter the HI3512 can be calibrated up to two points with a choice of seven conductivity standards. The % NaCl is calibrated to a single point at 100% with the optional HI7037 salinity standard. All GLP data regarding pH, relative mV, ISE, EC, or salinity calibration is stored for the user to review when necessary.
CAL Check™ - Hanna’s exclusive CAL Check™ diagnostics system ensures accurate pH readings every time by alerting users of potential problems during the calibration process. The CAL Check™ system eliminates erroneous readings due to dirty or faulty pH electrodes or contaminated pH buffer solutions during calibration. After the guided calibration process, the probe condition is evaluated and an indicator is displayed informing the user of the overall pH electrode status.
HI1131B pH Electrode - The HI3512 is supplied with the HI1131B glass body, double junction, refillable pH electrode with an indicating sensor made of High Temperature (HT) glass. The double junction and HT glass design allows the HI1131B to be used in a wide variety of application from samples with metals and Tris buffer to samples at elevated temperatures.
HI76310 Conductivity Probe - The HI76310 platinum, four-ring probe measures EC, TDS, resistivity, and salinity. The probe features a built-in temperature sensor and operates over a wide range from 0 μS/cm to 1000 mS/cm (actual conductivity), 0.00 to 400.0 g/L (actual TDS), and 0.0 to 400.0% NaCl.
Temperature Compensation - Temperature for pH measurements can be compensated for automatically (ATC) or manually (MTC) from -20.0 to 120.0°C. For EC measurements, temperature compensation can be manual, automatic, or disabled (NoTC). The temperature correction coefficient for EC or TDS, also referred to as β, is adjustable from 0.00 to 10.00 %/°C.
Automatic Calibration – The pH channel offers up to five-point pH calibration with seven standard buffers and up to two custom buffers. A five-point ISE calibration can be performed with six standard buffers. EC and TDS are automatically calibrated at up to two points with a choice of seven pre-programmed standards. Salinity is calibrated at one point using the HI7037 100% NaCl standard solution.
Autoranging - In the EC, TDS, and resistivity measurement modes, the HI3512 automatically chooses the optimum measurement scale based on the sample solution to maintain the highest possible accuracy.
Adjustable TDS Factor - The factor that relates conductivity to total dissolved solids is based on the type of sample being measured. For users to get an accurate determination of TDS based on their unique solution, the TDS factor is adjustable from 0.40 to 1.00.
GLP Data – The calibration data for each channel including date, time, standards used, offset, slope, cell constant, and cell factor can be accessed at any time through the HI3512 menu.
Data Logging – The log-on-demand feature allows up to 400 data points to be recorded. Up to 600 data points can be recorded when utilizing log-on-stability or interval logging, which allows user to specify time intervals from 5 seconds to 180 minutes.
Data Transfer – With a built-in logging function, measurements are stored in non-volatile memory, and can be transferred to a PC through the USB port using the optional HI92000 software and HI920013 USB cable (both sold separately).
|pH Range||-2.0 to 20.0 pH, -2.00 to 20.00 pH, -2.000 to 20.000 pH|
|pH Resolution||0.1, 0.01, 0.001 pH|
|pH Accuracy (@25ºC/77ºF)||±0.01 pH, ±0.002 pH|
|pH Calibration||up to five point calibration, seven standard buffers available (1.68, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45), and two custom buffers|
|pH Temperature Compensation||automatic or manual from -20.0 to 120.0 °C|
|mV Range||±2000 mV|
|mV Resolution||0.1 mV|
|mV Accuracy||±0.2 mV|
|Relative mV Offset Range||±2000 mV|
|EC Range||0 μS/cm to 400 mS/cm (shows values up to 1000 mS/cm absolute conductivity), 0.001 to 9.999 µS/cm, 10.00 to 99.99 μS/cm, 100.0 to 999.9 μS/cm, 1.000 to 9.999 mS/cm, 10.00 to 99.99 mS/cm, 1000 mS/cm (autoranging)|
|EC Resolution||0.001 μS/cm, 0.01 μS/cm, 0.1 μS/cm, 0.001 mS/cm, 0.01 mS/cm, 0.1 mS/cm, 1 mS/cm|
|EC Accuracy (@25ºC/77ºF)||±1% of reading (±0.01 μS/cm or 1 digit whichever is greater) excluding probe error|
|EC Calibration||automatic up to two points with seven Hanna standards (0.00 µS/cm, 84.0 µS/cm, 1.413 mS/cm, 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm)|
|EC Temperature Compensation||NoTC, MTC, ATC|
|TDS Range||0.000 to 9.999 ppm, 10.00 to 99.99 ppm, 100.0 to 999.9 ppm, 1.000 to 9.999 g/L, 10.00 to 99.99 g/L, 100.0 to 400.0 g/L (autoranging)|
|TDS Resolution||0.001 ppm, 0.01 ppm, 0.1 ppm, 1 ppm, 0.01 g/L, 0.1 g/L, 0.001 g/L|
|TDS Accuracy (@25ºC/77ºF)||±1% of reading (±0.05 ppm or 1 digit whichever greater) excluding probe error|
|TDS Factor||0.40 to 1.00|
|Resistivity Range||1.0 to 99.9 Ω•cm; 100 to 999 KΩ•cm; 1.00 to 9.99 KΩ•cm; 10.0 to 99.9 KΩ•cm; 100 to 999 KΩ•cm; 1.00 to 9.99 MΩ•cm; 10.0 to 100.0 MΩ•cm (autoranging)|
|Resistivity Resolution||0.1 Ω•cm; 1 Ω•cm; 0.01 KΩ•cm; 0.1 KΩ•cm; 1 KΩ•cm; 0.01 MΩ•cm; 0.1 MΩ•cm|
|Resistivity Accuracy||±1% of reading (±10 Ω or 1 digit whichever greater) excluding probe error|
|Salinity Range||0.0 to 400.0% NaCl|
|Salinity Resolution||0.1% NaCl|
|Salinity Accuracy (@25ºC/77ºF)||±1% of reading (excluding probe error)|
|Salinity Calibration||one point, with HI7037 calibration solution (optional)|
|Temperature Range||-20.0 to 120.0°C (-4.0 to 248.0°F)|
|Temperature Accuracy||±0.2°C; ±0.4°F (excluding probe error)|
|Temperature Resolution||0.1°C (0.1°F)|
|Temperature Coefficient||0.00 to 10.00 %/°C (for EC and TDS only; default value is 1.90%/°C)|
|Reference Temperature||15°C, 20°C and 25°C|
|ISE Range||1.00 E-7 to 9.99 E10 concentration (user selectable units)|
|ISE Resolution||3 digits|
|ISE Accuracy @ 25 °C/77 °F||±0.5% (monovalent ions); ±1% (divalent ions)|
|ISE Calibration Points||up to five-point calibration points six standard solutions available (0.1, 1, 10, 100, 1000, 10000 ppm)|
|Cell Constant||0.010 to 10.000|
|pH Electrode||HI1131B glass body pH electrode with BNC connector and 1 m (3.3’) cable (included)|
|EC Probe||HI76310 platinum four-ring EC/TDS probe and 1 m (3.3’) cable (included)|
|Temperature Probe||HI7662-T stainless steel temperature probe with 1 m (3.3’) cable (included)|
|Slope Calibration||from 80 to 110%|
|Temperature Source||automatic from sensor inside the probe; manual entry|
|Logging||400 samples, log-on-demand|
|Logging Interval||5, 10, 30 seconds; 1, 2, 5, 10, 15, 30, 60, 120, 180 minutes, AutoEnd (max 600 samples)|
|Environment||0 to 50°C (32 to 122°F), RH max 55% non-condensing|
|Input Impedance||10¹² Ohms|
|Power Supply||12 VDC adapter (included)|
|Dimensions||235 x 207 x 110 mm (9.2 x 8.14 x 4.33”)|
|Weight||1.8 kg (4 lbs)|
|Ordering Information||HI3512 is supplied with HI76310 EC/TDS probe, HI1131B pH electrode, HI7662-T temperature probe, HI70004 pH 4.01 buffer solution sachet, HI70007 pH 7.01 buffer solution sachet, HI700601 electrode cleaning solution sachet (2), HI7082 3.5M KCl electrolyte solution (30 mL), HI76404N electrode holder, 12 VDC adapter and instructions.|