Leica GS09
Leica GS09 GPS System Surveying Instruments Malaysia, Selangor, Kuala Lumpur (KL) Supplier, Suppliers, Supply, Supplies | Obsnap Instruments Sdn Bhd
Your tasks, your choices, our solutions!
Are you starting a new business? Have you been considering changing to GNSS surveying? Then the Leica GS09 is the surveying system for you. Providing a simple positioning tool that grows with your business to meet all your future measurement requirements.
The Leica GS09 can be used in a large variety of operating modes, providing you with a complete surveying systems. Requiring only the GS09 SmartAntenna and CS09 Controller, combined with appropriate accessories, many different operating choices are available.
  • SmartWorx Controller
The SmartWorx field software is based on the proven and familiar concept of the Leica System 1200. Made even easier to use with icon-based menus, ensures instant productivity.
  • RTK Rover
The extremely light-weight and cable free rover is comfortable to use for the entire day. Built exceptionally rugged, the rover withstands rough use and topple overs.
  • Reference Station
The easily setup RTK base station requires only the GS09 SmartAntenna, a radio modem and battery. By connecting the CS09 Controller, raw satellite data can be logged.
  • Network Rover
The Leica GS09 works perfectly in all reference networks. The network corrections can be received with Leica GSM/CDMA modules or by using your mobile phone.
  • SmartStation
Leica TPS instrucments can be combined with the GS09 SmartAntenna into one easy-to-use instrument
GNSS Technology Measurement Engine
  Leica patented SmartTrack+ technology ·         Jamming resistant measurements
·         High precision pulse aperture multipath correlator
·         Excellent low elevation tracking technology
·         Very low noise GNSS carrier phase measurements with <0.5 mm precision
·         /SPAN>Minimum acquisition time
No. of channels 120   channels
Reacquisition time < 1sec
GNSS Measurements
Satellite signals tracking GPS: L1, L2, L2C (C/A, P, C Code)
GLONASS: L1, L2 (C/A, P narrow Code)
Measurement Performance Accuracy 1
  DGPS/RTCM Typically 25 cm (rms)
RTK Rapid static (phase)
Static mode after
Horizontal: 5 mm + 0.5mm (rms)
Vertical: 10 mm + 0.5 ppm (rms)
RTK Kinematic (phase)
Moving mode after initialization
Horizontal: 3 mm + 0.5 ppm (rms)
Vertical: 6 mm + 0.5 ppm (rms)
Post Processing (phase)
Static with long
Horizontal: 5 mm + 0.5 ppm (rms)
Vertical: 10 mm + 0.5 ppm (rms)
One-The-Fly initialization
Reliability Better than 99.99% using Leica SmartCheck+ Technology
Time for initialization Typically 8 sec 2
RTK baseline range Up to 50 km
User Interface
Keys On / Off key
Led Status indicator Satellite tracking, Bluetooth® communication and battery power
Communication ports ·         Combined USB / Power port with 8-pin Lemo plug
·         Integrated Bluetooth® port
·         5-pin clip on contacts for Leica SmartStation setup
Weight 1.05 kg including battery
Dimension (diameter x height) 186 mm x 89 mm
Environmental specifications
Temperature, operating -40ºC to +65 ºC (-40 ºF to +149 ºF) 3
Temperature, storage -40 ºC to + 80 ºC (-40 ºF to +176 ºF) 3
Humidity 100% 4
Sealed against water IP67: Temporary submersion into water (max. dept 1m)
Sealed against sand and dust Dust tight, protection against blowing dust
Vibration Withstands vibrations in compliance with ISO9022-36-08
Drops Withstands 1m drop onto hard surface
Topple over Withstands topple over from a 2 m survey pole onto hard surface
Functional shock No loss of lock to satellite signals when used on a pole setup and submitted to pole bumps up to 150 mm
Power management
Supply Voltage Nominal 12V DC, Range 10.5 – 28V DC
Power consumption Typically: 1.8W, 150 mA
Internal Power time Up to 7 hours using GEB212 battery5
Communications RTK transmission
  Source Direct from GS09 (No datalogger required)
RTK format Leica Life propriety format
Radio Modems All Satellite and Pacific Crest radios in GFU or standard housing
Integration with TPS
SmartStation functionality Connects to Leica TPS1200, TS30 and TM30 instruments
Leica CS09 Controller
User Interface Standard software
  Operating system Microsoft Windows CE 5.0 software
Application software Leica SmartWorx field software
Terminal software Leica SmartWorx sensor control
Software control
Display ¼ VGA colour, graphics capable
Touch screen Toughened film on glass
Keyboard 62 keys with QWERTY alphanumeric  function keys
Illumination Backlight illuminated display and fully illuminated keys
Hardware Physical
  Dimension 218 mm x 123 mm x 47 mm
Weight of CS09 740g including battery
Weight of pole setup 3.47 kg for complete rover pole setup
Weight of network rover 2.85 kg for complete network rover using a Bluetooth® mobile phone
Data storage Removable CF card (256 MB and 1 GB available)
Communication ports ·         Combined USB/Power port with 8-pin Lemo plug)
·         2 x Bluetooth® ports Class 2
·         7-pin clip on contacts for GHT56 SmartHolder connection
Environmental Specifications
Temperature, operating -30ºC to +65 ºC (-22 ºF to +149 ºF)3
Temperature, storage -40 ºC to +80 ºC (-40 ºF to +176 ºF)3
Humidity 100%4
Sealed against water IP67: Temporary submersion into water (max. depth 1 m)
Sealed against sand and dust Dust tight, protection against blowing dust
Drops Withstands 1.5 m drop onto hard surface
Vibration Withstands vibrations in compliance with ISO9022-36-08
Power Management
Supply Voltage Nominal 12V DC, Range 11.5 – 28V DC
Power consumption Typically: 1.4W, 120mA
Internal Power supply Removable  rechargeable Li-lon battery,
GEB211 2.2Ah / 7.4V or GEB212 2.6 Ah / 7.4 V
Operation time Up to 13 hours using GEB212 battery5
RTK specifications
Data Formats Leica propriety formats (Leica, Leica Lite, Leica 4G) Optional CMR, CMR+, RTCM 2.1, RTCM 2.3, RTCM 3.0, RTCM 3.1)
RTK baseline Optional 5 km maximum baseline or unlimited baseline lengths
Position update rate 1 Hz standard, Optional 5 Hz (0.2 sec)
Network Rover VRS, FKP, iMAX, MAX, Nearest station
External Devices
Radio Modem Satellite and Pacific Crest radios in GFU housing
(connected using GHT56 SmartHolder)
Mobile Phone ·         GSM / CDMA modules in GFU housing
(connected using GHT56 SmartHolder)
·         Bluetooth ® Mobile phones
GS09 SmartAntenna ·         Bluetooth ®
·         USB Cable
PC with Microsoft Windows ·         USN data cable
·         CF-card reader
Internet Mobile phone using FTP protocol
1 Measurement precision and accuracy in position and accuracy in height are dependent upon various factors including number of satellites, geometry, observations time, ephemeris accuracy, ionospheric conditions, multipath etc. Figures quoted assume normal to favorable conditions. Times required are dependent upon carious factors including number of satellites, geometry, ionospheric conditions, multipath etc. GPS and GLONASS can increase performance and accuracy by up to 30% relative to GPS only.
2 May vary due to atmospheric conditions, multipath, obstructions, signal geometry and number of tracked signals.
Compliance with ISO9022-10-08, ISO9022-11-special and MIL-STD-810F Method 502.4-II, MIL-STD-810F Method 501.4II
4 Compliance with ISO9022-13-06, ISO9022-12-04 and MIL-STD810F Method 507.4-1
5 May vary with temperature and battery age.
Leica SmartWorx Field Software
Standard features
Always in view status information bar
Permanent display of current positioning accuracy
Data import: ASCII, DXF, GSI, DTM models
Data export: Custom ASCII, DXF, XML, Raw data
Field-to-Office data transfer using ftp
Setup Reference
Configuration of RTK base station for operation without requiring a controler
Selection of radio channel
Computation of navigated base position
GPS Resection
Provides a rapid localization of a GPS job
Positions onto existing control points
Uses a similar method as a TPS resection
Requires no knowledge of coordinate systems
Determine Coordinate Systems
For the conversion of GNSS positions to local coordinates
Provides a Onestep, Twostep or Classic 3D transformation type
One point localization for rapid calibration
Display and recording of parameters and residuals
Automatic matching of measured and entered points
Coordinate Geometry
Inverse, intersections, line and arc related computations
Calculations made from entered or measured points
Graphical plot view of computations
Coding of calculated points
Manual or automated point measurement
Configurable display layout
Point, line, area or free coding
Smart and Quick coding
Measuring of hidden points using offset data
Orientation to north, point, line, sun or by arrow
Quality comparison between stake and design
Automatic selection of closest design point
Graphical selection of point from map display
Design height editing during stakeout
Optional features
Reference Line
Staking of line, arcs and polylines
Staking of chainages
Staking of slopes
Quality comparison between stake and design
Graphical display of design
Staking of alignments:
Stringlines, single/double cross slopes, batters, surfaces
Graphical staking and quality control
Alignments can be created in the field
Importing of alignments from various design formats
Comprehensive field report of completed work
Volume Calculations
Computation of surface areas and volumes
Using imported or measured points
Graphical display of triangles
DXF export of measured surfaces
Comprehensive reporting
DTM Stakeout
Staking out of height based on a digital terrain model
Staking out of points with height taken from the DTM
Various DTM layers can be selected for stakeout
Can be used for quality control of design surface
Functionality Options
GLONASS satellite tracking
Raw data logging for post-processing
RTK functionality with unlimited baseline length
Position and display update rate of 5 Hz (0.2 sec)
Reference network access (includes unlimited baseline)
RTCM/CMR RTK data messages input
Bluetooth®  mobile phone connection

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version